PTNZ25X BENCH DRILLING MACHINE
Features:
¡¤ 3- phase with two-voltage collocation
¡¤ Gear shift
¡¤ Superior quality of gears with harded and lapped gears of surface
¡¤ The model of machines with A is electromagnetism clutch transmission
feed, with B is mechanical feed, without A and B is manual feed.
|
¡¡ Model |
PTNZ25X | PTNZ30X/30BX | PTNZ35X/35AX/35BX |
| Max. drilling diameter. (steel) and tapping diameter | ¦µ25/M16mm | ¦µ30/M20mm | ¦µ35/M22mm |
| Max. travel of spindle | 110 mm | 135 mm | 160 mm |
| Max. distance from spindle to generating line of column | 240 mm | 260 mm | 320 mm |
| Max. distance from spindle nose to surface of base worktable | 650 mm | 700 mm | 645 mm |
| Max. travel of spindle box | 500 mm | 520 mm | 515 mm |
| Swivel angle of spindle box | - | - | ¡À45¡ã |
| Spindle taper bore | MT3 | MT3 | MT4 |
| Spindle speed steps | 6 | 12 | 12 |
| Spindle speed range | 125~2825 r/min | 125~3030 r/min | 125~3030 r/min |
| Spindle feed steps | - | 3 (PTEZN4030B) | 3 (PTEZN4035A/4035B) |
| Spindle feed range (mm/r) | - | 0.1~0.3 (PTEZN4030B) | 0.1~0.3 (PTEZN4035A/4035B) |
| Effective working area of worktable | 310x320 mm | 335x340 mm | 400x360 mm |
| Diameter of column | ¦µ95 mm | ¦µ110 mm | ¦µ120 mm |
| Power of motor | 0.75 kw | 0.85/1.1 kw | 1/1.2 kw |
| Machine dimension | 700x500x1500 mm | 740x420x1610 mm | 810x460x1640 mm |
| Net weight and gross weight | 280/310 KG | 310/350 KG | 340/370 KG |
| Mode of spindle feed | Manual | Manual / Mechanical | Manual / Electromagnetism / Mechanical |
| ¡¡ | ¡¡ | ¡¡ | ¡¡ |